|
汉高乐泰（中国）有限公司 
| 联系人：樊林 先生 (业务经理) |
 |
| 电 话：0755-879212007 |
|
| 手 机：18870204800 |
|
 |
|
 |
|
 |
|
| 乐泰243 乐泰胶水243 |
(R)
TDS 乐泰 243(TM), January-2008
This product is not normally recommended for use on plastics Conversions
(particularly thermoplastic materials where stress cracking of (°C x 1.8) + 32 = °F
the plastic could result). Users are recommended to confirm kV/mm x 25.4 = V/mil
compatibility of the product with such substrates. mm / 25.4 = inches
μm / 25.4 = mil
N x 0.225 = lb
Directions for use N/mm x 5.71 = lb/in
For Assembly N/mm2 x 145 = psi
MPa x 145 = psi
1. For best results, clean all surfaces (external and internal)
(R) N·m x 8.851 = lb·in
with a 乐泰 cleaning solvent and allow to dry.
N·m x 0.738 = lb·ft
2. If the material is an inactive metal or the cure speed is too
N·mm x 0.142 = oz·in
slow, spray all threads with Activator 7471(TM) or 7649(TM)
mPa·s = cP
and allow to dry.
3. Shake the product thoroughly before use. Note
The data contained herein are furnished for information only
4. To prevent the product from clogging in the nozzle, do not
and are believed to be reliable. We cannot assume
allow the tip to touch metal surfaces during application.
responsibility for the results obtained by others over whose
5. For Thru Holes, apply several drops of the product onto
methods we have no control. It is the user's responsibility to
the bolt at the nut engagement area.
determine suitability for the user's purpose of any production
6. For Blind Holes, apply several drops of the product down
methods mentioned herein and to adopt such precautions as
the internal threads to the bottom of the hole.
may be advisable for the protection of property and of persons
7. For Sealing Applications, apply a 360° bead of product
against any hazards that may be involved in the handling and
to the leading threads of the male fitting, leaving the first
use thereof. In light of the foregoing, 汉高 Corporation
thread free. Force the material into the threads to
specifically disclaims all warranties expressed or implied,
thouroughly fill the voids. For bigger threads and voids,
including warranties of merchantability or fitness for a
adjust product amount accordingly and apply a 360° bead
particular purpose, arising from sale or use of 汉高
of product on the female threads also.
Corporation’s products. 汉高 Corporation specifically
8. Assemble and tighten as required. disclaims any liability for consequential or incidental
damages of any kind, including lost profits. The discussion
For Disassembly
herein of various processes or compositions is not to be
1. Remove with standard hand tools.
interpreted as representation that they are free from
2. In rare instances where hand tools do not work because domination of patents owned by others or as a license under
of |
 |
| |
|
|
 |
|
|
免责声明： 以上所展示的信息由会员自行提供，内容的真实性、准确性和合法性由发布会员负责，企业录对此不承担任何责任。如有侵犯您的权益，请来信通知删除。